Sonically modified zeolites with MFI and USY type structure as catalysts for methane combustion

Preparation and physicochemical characterisation

Authors

DOI:

https://doi.org/10.5604/01.3001.0013.5388

Keywords:

hydrothermal synthesis, zeolites, ultrasounds, methane combustion

Abstract

The objectives of our study were to prepare of ZSM-5 and USY-based catalysts by hydrothermal method, containing metallic active phase, deposited by both conventional ionic-exchange or ultrasonic irradiation. Prepared materials were characterized by various physicochemical methods, such as XRD, BET, SEM, UV-VIS and the sorption of ammonia monitored by FT-IR spectroscopy. The XRD data confirmed pure MFI or USY type structure zeolite. BET and ammonia sorption results have shown that the presented method leads to preparation of highly porous and acidic systems. Metallic active phase was found as cations and oxides with hexagonal and octahedral coordination.

Downloads

Download data is not yet available.

References

Khirsariya P, Mewada RK: Single step oxidation of methane to methanol – towards better understanding. Procedia Eng. 2013; 51: 409–415.

Jones C, Taube D, Ziatdinov VR, Periana RA, Nielsen RJ, Oxgaard J, Goddard W: Selective oxidation of methane to methanol catalyzed with C-H activation by homogeneous cationic gold. Angew. Chem. Int. Ed. Engl. 2004; 6: 4626–4629.

Xiao P, Wang Y, Nishitoba T, Kondo JN, Yokoi T: Selective oxidation of methane to methanol with H2O2 over Fe-MFi zeolites catalyst using sulfone solvent. Chem. Commun. 2019; 55: 2896–2899.

Kierys A, Goworek J: Adsorbenty i Katalizatory. Wybrane technologie a środowisko, w Materiały krzemionkowe nowej generacji, Uniwersytet Rzeszowki, 2012. http://www.ztch.umcs.lublin.pl/materialy/praca_zbiorowa_wprowadzenie.pdf

Bonrath W: Ultrasound supported catalysis. Ultrason. Sonochem. 2005; 12: 103–106.

Andac O, Tatlıer M, Sirkecioglu A, Ece I, Erdem-Senatalar A: Effects of ultrasound on zeolite A synthesis. Microporous Mesoporous Mater. 2005; 79: 225–233.

Andac O, Murat Telli S, Tatlier M, Erdem-Senatalar A: Effects of ultrasound on the preparation of zeolite A coatings. Microporous Mesoporous Mater. 2006; 88: 72–76.

Wang B, Wu J, Yuan ZY, Li N, Xiang S: Synthesis of MCM22 zeolite by an ultrasonic-assisted aging procedure. Ultrason. Sonochem. 2008; 15: 334–338.

Pal P, Das JK, Das N, Bandyopadhyay S: Synthesis of NaP zeolite at room temperature and short crystallization time by sonochemical method. Ultrason. Sonochem. 2013; 20: 314–321

Hosseini M, Zanjanchi MA, Ghalami-Choobar B, Golmojdeh H: Ultrasound-assisted dealumination of zeolite Y. J. Chem. 2015; 127: 25–31.

Pereda-Ayo B, De La Torre U, JoséIllán-Gómez M, Bueno-López A, González-Velasco JR: Role of the different copper species on the activity of Cu/zeolite catalysts for SCR of NOx with NH3. Appl. Catal. B. 2014; 147: 420–428.

Yan JY, Lei GD, Sachtler WMH, Kung HH: Deactivation of Cu/ZSM-5 catalysts for lean NOx reduction: Characterization of changes of Cu state and zeolite support. J. Catal. 1996; 161: 43–54.

Janas J, Machej T, Gurgul J, Socha RP, Che M, Dzwigaj S: Effect of Co content on the catalytic activity of CoSiBEA zeolite in the selective catalytic reduction of NO with ethanol: Nature of the cobalt species. Appl. Catal. B. 2007; 75: 239–248.

Li LD, Shen Q, Yu JJ; Hao ZP, Xu ZP, Lu GQM: Fe−USY zeolite catalyst for effective decomposition of nitrous oxide. Environ. Sci. Technol. 2007; 41: 7901–7906.

Lee K, Kosaka H, Sato S, Yokoi T, Choi B, Kim D: Effects of Cu loading and zeolite topology on the selective catalytic reduction with C3H6 over Cu/zeolite catalysts. J. Industrial and Eng. Ch. 2019; 72: 73–86.

Datka J, Kawałek M: Strength of Brønsted acid sites in boralites. J. Chem. Soc. Faraday Trans. 1993; 89: 1829–1831.

Yashmina T, Yamazaki K, Ahmad H, Katsuta M, Hara N: Alkylation on synthetic zeolites: II. Selectivity of p-xylene formation. J. Catal. 1970; 17: 151–156.

Freude D, Frochlich T, Hunger M, Pfeifer H, Scheler G: NMR studies concerning the dehydroxylation of zeolites HY. Chem. Phys. Lett. 1983; 98: 263–266.

Brylewska K, Tarach KA, Mozgawa W, Olejniczak Z, Filek U, Góra-Marek K: Modification of ferrierite through post-synthesis treatments. Acidic and catalytic properties. J. Mol. Struct. 2016; 1126: 147–153.

Chmielarz L, Kuśtrowski P, Zbroja M, Gil-Knap B, Datka J, Dziembaj R: SCR of NO by NH3 on alumina or titania pillared montmorillonite modified with Cu or Co Part II. Temperature programmed studies. Appl. Catal. B. 2004; 53: 47–61.

Rutkowska M, Diaz U, Palomares AE, Chmielarz L: Cu and Fe modified derivatives of 2D MWW-type zeolites (MCM22, ITQ-2 and MCM-36) as new catalysts for DeNOx process. Appl. Catal. B. 2015; 168–169: 531–539.

Urquieta-Gonzales EA, Pequin RPS, Batiste MS: Identification of extra-framework species on Fe/ZSM-5 and Cu/ZSM-5 catalysts typical microporous molecular sieves with zeolitic structure. Materials Research. 2002; 5: 321–327.

Shen Q, Li L, He C, Zhang X, Hao Z, Xu Z: Cobalt zeolites: Preparation, characterization and catalytic properties for N2O decomposition. Asia-Pac. J. Chem. Eng. 2012; 7: 502–509.

Xie P, Luo Y, Ma Z, Wang L, Huang C, Yue Y, Hua W, Gao Z: CoZSM-11 catalysts for N2O decomposition: Effect of preparation methods and nature of active sites. Appl. Catal. B. 2015; 170: 34–42.

Chlebda DK, Stachurska P, Jędrzejczyk RJ, Kuterasiński Ł, Dziedzicka A, Górecka S, Chmielarz L, Łojewska J, Sitarz M, Jodłowski PJ: DeNOx abatement over sonically prepared iron substituted Y, USY and MFI zeolite catalysts in lean exhaust gas conditions. Nanomaterials. 2018; 8: 21–39.

Zhao Z, Duan A, Xu C: CrHZSM-5 zeolites- highly efficient catalysts for catalytic cracking of isobutane to produce light olefins. Catal. Lett. 2006; 109: 65–70.

Diffractograms of the copper- cobalt-, iron- and chromium-substituted zeolites

Downloads

Published

2019-06-30

Issue

Section

Original articles

How to Cite

Kuterasiński, Ł., Dymek, K., & Jodłowski, P. (2019). Sonically modified zeolites with MFI and USY type structure as catalysts for methane combustion: Preparation and physicochemical characterisation. Science, Technology and Innovation, 6(3), 11-18. https://doi.org/10.5604/01.3001.0013.5388